For screen reader problems with this website, please call(541) 673-47645 4 1 6 7 3 4 7 6 4Standard carrier rates apply to texts.
Good Vibrations
(541) 673-4764
1/0 gauge complete power, ground and signal installation kit for two amplifiers.
Color | Red |
---|---|
Manufacturer Warranty | 1 Year |
Fuse Type | ANL |
---|---|
Dual Amp Installation Kit | Yes |
Battery PWR/GND Gauge | 1/0 AWG |
Amplifier PWR/GND Gauge | 4 AWG |
Speaker Wire Gauge | 16 AWG |
Fuse Size | 300 Amp |
See Price in Cart
17 feet of 1/0 AWG power wire
3 feet of 1/0 AWG ground wire
4 feet of 4 AWG power wire
4 feet of 4 AWG ground wire
ANL/MAXI fuse holder and fuse
30 feet of 16 AWG speaker wire
(3) 16 feet twisted pair RCAs
(2) 4 AWG distribution block
20 feet of remote wire
300 Amp fuse
FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
100% Pure Crystal-Oxygen Free Copper (PC-OFC)
Includes appropriate wire termination hardware
1/0 AWG (53.5mm²) 4,704 strands
4 AWG (21.1mm²) 1,862 strands
16 AWG (1.31mm²) 65 strands
1 Year Warranty
Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
Color | Red |
Manufacturer Warranty | 1 Year |
Fuse Type | ANL |
Dual Amp Installation Kit | Yes |
Battery PWR/GND Gauge | 1/0 AWG |
Amplifier PWR/GND Gauge | 4 AWG |
Speaker Wire Gauge | 16 AWG |
Fuse Size | 300 Amp |