For screen reader problems with this website, please call(541) 673-47645 4 1 6 7 3 4 7 6 4Standard carrier rates apply to texts.
Good Vibrations
(541) 673-4764
The Power T1650-S is a T1 component system with a separate tweeter and a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles. Supplied with an external tweeter crossover.
Impedance | 4 Ohms |
---|---|
Manufacturer Warranty | 1 Year |
Car Speaker Size | 6.5 |
Mounting Hardware Included | Yes |
Water Resistant | No |
RMS Power Handling (Watts) | 80 |
Peak Power Rating (Watts) | 160 |
Shallow Mount | No |
Midrange Mounting Depth | 2.52" (64 mm) |
---|---|
Tweeter Mounting Depth | 0.50" (13 mm) |
Sensitivity (dB @ 1W/1M) | 88 |
Grille/Trim Ring Included | Yes |
Mounting Hardware | Yes |
Speaker Type | Component System |
Frequency Response (Hz) | 47Hz - 20kHz |
Power Handling (RMS) | 80 watts RMS; 160 Watts MAX |
Crossover | 18dB/Octave High Pass; 12dB/Octave Low Pass |
Nominal Impedance (Ohms) | 4-Ohm |
Midrange Size (Nominal Diameter) | 6.5" |
Tweeter Size (Nominal Diameter) | 1.0" (25.4 mm) |
CEA-2031 Compliant | CEA-2031 Guidelines |
Request a Quote
Power series performance and sound quality in a component speaker system. The 6.5” component system features a separate tweeter, dedicated crossover and has a new FlexFit 2 basket optimized for a wide variety of U.S., European, and import vehicles.
Injection molded carbon fiber filled polypropylene cone
1" treated fabric dome tweeter
VAST vertical attach surround technique
Santoprene rubber surround
High temp aluminum voice coil
Fatigue and tear resistant poly cotton spider
FlexFit 2 mounting
Stamp-cast aluminum frame
Asymetrical 18dB HP and 12dB LP external crossover network
User selectable tweeter level, bi-amp, and on/off axis switching
Flush and surface (angled) tweeter mounting hardware included
Grilles and mounting hardware included
1 Year Warranty
Klippel is a speaker certification program allowing us to deliver the best possible speakers.
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations.
Our DDC™ (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation.
The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.
Impedance | 4 Ohms |
Manufacturer Warranty | 1 Year |
Car Speaker Size | 6.5 |
Mounting Hardware Included | Yes |
Water Resistant | No |
RMS Power Handling (Watts) | 80 |
Peak Power Rating (Watts) | 160 |
Shallow Mount | No |
Midrange Mounting Depth | 2.52" (64 mm) |
Tweeter Mounting Depth | 0.50" (13 mm) |
Sensitivity (dB @ 1W/1M) | 88 |
Grille/Trim Ring Included | Yes |
Mounting Hardware | Yes |
Speaker Type | Component System |
Frequency Response (Hz) | 47Hz - 20kHz |
Power Handling (RMS) | 80 watts RMS; 160 Watts MAX |
Crossover | 18dB/Octave High Pass; 12dB/Octave Low Pass |
Nominal Impedance (Ohms) | 4-Ohm |
Midrange Size (Nominal Diameter) | 6.5" |
Tweeter Size (Nominal Diameter) | 1.0" (25.4 mm) |
CEA-2031 Compliant | CEA-2031 Guidelines |