For screen reader problems with this website, please call(541) 673-47645 4 1 6 7 3 4 7 6 4Standard carrier rates apply to texts.
Good Vibrations
(541) 673-4764
The TMS65 is a full range coaxial speaker designed to fit the fairing speaker locations of the 2014+ model year Harley-Davidson® BOOM!™ Audio and BOOM!™ Audio Stage-I systems. It features a Neodymium motor structure driving a co-molded, reinforced polypropylene cone with Santoprene surround. It also features an ultra-efficient 25mm dome tweeter with integrated phase plug and is made water/weather resistant with the addition of a Santoprene front isolation spider connecting between the tweeter housing and cone assembly. The speaker mounts using the factory hardware and comes with new grille assemblies.
Impedance | 4 Ohms |
---|---|
Manufacturer Warranty | 2 Year |
Car Speaker Size | 6.5 |
Mounting Hardware Included | Yes |
Water Resistant | Yes |
RMS Power Handling (Watts) | 75 |
Peak Power Rating (Watts) | 150 |
Shallow Mount | No |
Speaker Type | 2-Way Coaxial |
---|---|
Power Handling (RMS) | 75 Watts RMS |
Crossover | Built-in tweeter crossover |
Grille/Trim Ring Included | Yes |
Mounting Hardware | Yes |
Vehicle Compatibility | Harley-Davidson Road Glide 2015+, Harley-Davidson Street Glide 2014+ |
Power Handling (MAX) | 150 Watts MAX |
Voice Coil Diameter (in/mm) | 1.40" 35.56 mm |
Frequency Response (Hz) | 56 Hz - 20 kHz |
Sensitivity (dB @ 1W/1M) | 91 dB |
Sensitivity (dB @ 2.83V/1M) | 94 dB |
Included In The Box | (2) Speakers, (2) 2015+ Road Glide Grilles, (2) 2014+ Street Glide Grilles, (2) 2014+ Tour-Pak Grilles, (1) Hardware Pack |
CEA-2031 Compliant | CEA-2031 Gudelines |
Midrange Size (Nominal Diameter) | 6.5" |
Nominal Impedance (Ohms) | 4-Ohm |
The TMS65 full range coaxial speaker is designed for direct fitment application in 2014 and newer Harley-Davidson® motorcycle in both the fairing and Tour-Pak locations. This speaker directly replace the existing factory speakers using the factory mounting hardware and speaker connectors.
It features a compact Neodymium motor structure driving a co-molded, reinforced polypropylene cone with Santoprene surround This ensures that you get maximum frequency response and output in both the mid and low frequency range. It also features an ultra-efficient 25mm dome tweeter with integrated phase plug for crisp clear highs even at highway cruising speeds.
It is made water/weather resistant with the addition of a Santoprene front isolation spider connecting between the tweeter housing and cone assembly. The speaker requires no modification of the factory location and comes with new grille assemblies for both fairing and Tour-Pak applications.
Harley-Davidson® is a registered trademark of Harley-Davidson Motor Company
Element Ready design that is weather and water resistant
Neodymium Tweeter with Integrated Phase Plug and ASA Grill
Ultra-Efficient 25mm Proprietary Film Dome Tweeter
Carbon-Fiber Re-Inforced Polypropylene Cone
Santoprene VAST Surround
Co-Molded Cone and Surround
Santoprene Front Isolation Spider
Poly-Cotton Spider
High Power 35mm Voice-Coil
Ultra-Efficient Neodymium Ring Magnet Motor
Ultra-High Temperature Glass Re-Inforced Polymer Frame
Integrated Spade Terminals
Integrated 6dB Crossover with High Power Polyester Capacitor
Low Profile Coaxial Tweeter Design
Discreet (Hidden) Tweeter Wire
Designed for 2014+ Harley-Davidson® Street Glide®/Road Glide® and Tour-Pak
Grilles for Fairing and rear Tour-Pak included
2-Year Warranty
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
These models are protected against Dust, UV, Temperature, Water, Corrosion & Vibration.
The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
Speaker Type | 2-Way Coaxial |
Power Handling (RMS) | 75 Watts RMS |
Crossover | Built-in tweeter crossover |
Grille/Trim Ring Included | Yes |
Mounting Hardware | Yes |
Vehicle Compatibility | Harley-Davidson Road Glide 2015+, Harley-Davidson Street Glide 2014+ |
Power Handling (MAX) | 150 Watts MAX |
Voice Coil Diameter (in/mm) | 1.40" 35.56 mm |
Frequency Response (Hz) | 56 Hz - 20 kHz |
Sensitivity (dB @ 1W/1M) | 91 dB |
Sensitivity (dB @ 2.83V/1M) | 94 dB |
Included In The Box | (2) Speakers, (2) 2015+ Road Glide Grilles, (2) 2014+ Street Glide Grilles, (2) 2014+ Tour-Pak Grilles, (1) Hardware Pack |
CEA-2031 Compliant | CEA-2031 Gudelines |
Midrange Size (Nominal Diameter) | 6.5" |
Nominal Impedance (Ohms) | 4-Ohm |
Impedance | 4 Ohms |
Manufacturer Warranty | 2 Year |
Car Speaker Size | 6.5 |
Mounting Hardware Included | Yes |
Water Resistant | Yes |
RMS Power Handling (Watts) | 75 |
Peak Power Rating (Watts) | 150 |
Shallow Mount | No |